Turbosound Speaker 35 User Manual

Quick Start Guide  
IMPACT series  
Models covered by this Quick Start Guide  
IMPACT35, IMPACT55T, IMPACT65T.  
Thank you for choosing a TURBOSOUND IMPACT series loudspeaker product for your application. If you would like  
further information about this or any other TURBOSOUND product, please contact us. A detailed user manual on this  
product is available on our web site at www.turbosound.com  
Unpacking the Impact Loudspeakers  
After unpacking the loudspeakers please check carefully for damage. If damage is found please notify your supplier at  
once. You, the consignee, must instigate any claim. Please retain all packaging in case of future re-shipment.  
System Requirements  
Low Impedance Systems  
When used as part of a low impedance system Impact series loudspeakers require only one amplifier channel for correct  
operation, the frequency splitting between the LF driver and the HF driver being accomplished by the internal passive  
crossover network built into each enclosure. Select the 16setting on the voltage tap changer on the bottom of the  
cabinet. Amplifiers should be capable of delivering long term broadband power equal to the loudspeaker’s program power  
rating at its stated nominal impedance.  
Use with Subwoofers  
Passive subwoofers such as the TSB-110 can be added to increase low frequency performance without the need for  
additional power amplifiers. The subwoofer’s internal crossover filters high frequency signals out of the subwoofer  
cabinet to ensure a clean transition. Connect first to the subwoofer and then link out to the satellite speakers.  
IMPACT 35  
L
R
TSB-110  
L
EQ  
R
POWER AMPLIFIER  
Distributed Systems  
Impact loudspeakers can be used on 70 volt or 100 volt distributed systems. Connect  
loudspeakers to a suitable distribution amplifier, making sure that the maximum sum of the  
loudspeakers’ transformer taps do not exceed the distribution amplifier’s rated power  
output. Adjust the voltage tap selector to provide the appropriate loudness level.  
5 7 .  
15  
Loudspeaker Connections  
Electrical connections to the IMPACT loudspeaker are provided as an integral part of the adjustable wall bracket supplied  
with each loudspeaker. Simply follow the instructions in the Mounting and Fixing section following.  
IMPACT Quick Start Guide - Page - 1  
 

Technika Model Vehicle 23 230 User Manual
Telex Wireless Office Headset PH 3500 User Manual
TomTom GPS Receiver 1EG005207 User Manual
Toshiba Marine Radio A10 User Manual
Tunturi Rowing Machine R 215 User Manual
Tyco Computer Monitor 1229L User Manual
U Line Ice Maker SS1095 User Manual
Uniflame Gas Grill HBT920W User Manual
Vinotemp Refrigerator VT 15 TS User Manual
Wayne Water Pump JCU50 User Manual