Tripp Lite Network Card U244 001 R User Manual

• If you encounter the driver compatibility dialog box upon  
installing the driver, click “Yes” to continue with the installation.  
Installing the Driver  
Caution: DO NOT connect the adapter to your computer before  
installing the driver  
Quick Start Guide  
• Restarting your computer is necessary to successfully install  
the driver. When prompted to restart your computer, click “Yes.”  
If you are not prompted to restart your computer you should  
manually restart it.  
Insert the included driver CD into your computer’s CD-ROM drive.  
The setup program should run automatically. If not, locate and  
double-click the “Setup.exe” file in the “Driver” folder on the CD.  
Follow the on-screen prompts to complete installation of the driver.  
Connecting the USB Cable to the VGA/DVI Adapter  
1. Connect the included USB cable from your computer to the  
adapter  
USB to VGA/DVI  
For Windows Vista® users:  
• If you encounter the “User Account Control” dialog box upon  
installing the driver, either enter the administrator password or click  
Allow” to continue with the installation.  
Adapter  
2. For DVI monitors, connect the adapter to the monitor using a  
Tripp Lite P560-Series or P561-Series cable (not included).  
Model: U244-001-R  
• If you encounter the driver signature dialog box upon installing the  
driver, click “Install this driver software anyway” to continue with  
the installation.  
For VGA monitors, you must first connect the included DVI to  
VGA adapter to the U244-001-R, and then connect the adapter to  
the monitor using a Tripp Lite P502-Series or P512-Series cable  
(not included). Power on your monitor after connecting it to the  
adapter.  
• Restarting your computer is necessary to successfully install the  
driver. When prompted to restart your computer, click “Yes.” If you  
are not prompted to restart your computer you should manually  
restart it.  
3. Windows Vista and Windows 2000 will automatically complete  
the installation for you, and the screen from your computer will  
be displayed on the add-on monitor. If the screen of the add-on  
monitor is blank, restart the computer. Windows XP will display  
a “Found New Hardware Wizard.” Follow the steps below to  
complete the installation on Windows XP.  
Note: This Quick Start Guide contains only basic  
installation instructions. For more detailed instructions,  
reference the Owner’s Manual on the CD.  
For Windows® XP users:  
• If you encounter the driver signature dialog box upon installing the  
driver, click “Continue Anyway” to continue with the installation.  
Equipment Connection Warning: Use of this equipment in life support  
applications where failure of this equipment can reasonably be expected to  
cause the failure of the life support equipment or to significantly affect its safety or  
effectiveness is not recommended. Do not use this equipment in the presence of  
a flammable anesthetic mixture with air, oxygen or nitrous oxide.  
For Windows 2000 users:  
• If prompted for a system patch after starting the “Setup.exe” file,  
you must download and install the required patch before installing  
the driver.  
Copyright © 2008 Tripp Lite. All rights reserved. All trademarks are the property of  
their respective owners.  
 

Toshiba Security Camera IK WR04A User Manual
Transcend Information Computer Hardware TS RDM1 User Manual
Triarch Indoor Furnishings 31020 MP User Manual
Tripp Lite Automobile Accessories SR25UBEXPKD User Manual
Tripp Lite Network Cables N201 005 OR User Manual
Uniden Two Way Radio TR622 2 User Manual
Univex Marine Lighting 6510SS1 User Manual
Verizon Cell Phone CDM7076 User Manual
Verizon Cell Phone QSG6410VW User Manual
Vizio Blu ray Player VBR 100 User Manual